SD710 通用伺服驱动器SD710 通用伺服驱动器升级了硬件与结构，支持 17 位或 23 位绝对值编码器，响应频率最高为 3.0 kHz。
规格参数
| Encoder feedback | Serial encoder: absolute value encoder |
|---|---|
| Operating temperature | 0°C~55°C (55°C~60°C can be used after derating) |
| Storage temperature | -20℃~ 65℃ |
| Operating temperature | Below 95%RH (no freezing and condensation) |
| Storage temperature | Below 95%RH (no freezing and condensation) |
| Shock resistance | 4.9m/s |
| Impact strength | 19.6m/s |
| Protection class | IP20 |
| Altitude | Less than 1000m (1000m-2000m, need to reduce the rated value before use) |
| Other | No electrostatic interference, strong electric field, strong magnetic field, radiation, etc. |
| Speed control range | 1: 5000 (the lower limit in the speed control range is the value under the condition that the rated torque load does not stop) |
| Speed volatility | Load fluctuation:±0.01% or less of rated speed (load fluctuation: 0%~100%) Voltage fluctuation:0% of rated speed (voltage fluctuation: ±10%) Temperature fluctuation:±0.01% or less of rated speed (temperature fluctuation: 25℃±25℃) |
| Torque control accuracy | ±1% (reproducibility) |
| Soft start time setting | 0s~10s (acceleration and deceleration can be set separately) |
| Feedforward compensation | 0%~100% |
| 485 | Standard |
| CAN | Optional |
| USB | Computer host computer, standard configuration, in line with USB2.0 specification (12Mpps) |
| Display function | CHARGE, 8-segment LED*5 digits |
| Panel operator function | Button switch*4 |
| Regeneration | Function can be built-in/external |
| Display function | Overcurrent, overvoltage, undervoltage, overload, regeneration fault, encoder disconnection, overtravel protection, etc. |
| Accessibility | Gain adjustment, alarm recording, JOG operation, etc. |
| Encoder pulse frequency division output | Phase A, Phase B, Phase C: Linear drive output, frequency-divided pulse number: 35~32767 |
